9.1 Intake Filter
1. Switch the device off.
2. Unscrew the intake filter (Fig. 21).
3. Clean the filter in an ultrasound bath (we recom-
mend
GO-2011
plaster solvent, Art. No. 2011-0000).
4. Reinstall the intake filter (Fig. 21).
Never operate the device without the
intake filter!
9.2 Seal Surfaces
The following seal surfaces must always be kept clean
in order to ensure correct vacuum built up and the
secure retention of the mixing bowl during the mixing
process:
a) Seal between the device and the paddle (Fig. 22a);
b) Seal between the paddle and the bowl Fig. 22b).
Tip:
You should regularly coat the rubber seals with
Vaseline. This will significantly increase their
service life and optimize to unit’s function.
9.3 Replacing the Device Fuses
1. Unplug the device from the power supply (Fig. 13).
2. Unscrew the fuse holder (Fig. 23)
Device fuse:
Twister pro,
230 V = T 2 A
Twister pro
, 120 V = T 4 A
3. Remove the old fuse and install the new one
(Fig. 24).
4. Reinstall the fuse holder (Fig. 23).
10. Spare Parts
Please refer to the enclosed spare parts list for all
consumables and spare / replacement parts.
11. Warranty
Provided the unit is properly used, Renfert warrants
the
Twister pro
for a
period of 3 years
. Components
subject to natural wear (e.g., paddles, mixing bowls,
and intake filters) are excluded from this warranty. The
warranty is voided in case of improper use; failure to
observe the operating, cleaning, maintenance, and
connection instructions; in case of independent
repairs or repairs by unauthorized personnel; if spare
parts from other manufacturers are employed, or; in
case of unusual influences or influences not in
compliance with the utilization instructions. Warranty
service shall not extend the original warranty.
12. Technical Specifications
Mains voltage:
230 V, 50-60 Hz,
120 V, 50-60 Hz
Protection class in
accord. with IEC 536:
I
Power consumption:
190 W
Speed:
150 to 600 rpm
Device fuses:
T 2 A (
Twister
230 V)
T 4 A (
Twister
120 V).
Capacity:
15 l/min.
Vacuum, max.:
approx. 200 mbar, absolute
Dimensions (WxHxD): 140 x 325 x 225 mm
[5.516 x 12.805 x 8.865 inch]
Weight:
10.1 kg, without mixing bowl
13. Standard Delivery
1
Twister pro
vacuum mixer
1 Mixing bowl, 500 ml, incl. paddle
1 Set of Operating Instructions
1 Spare parts list
1 Drill template
1 Mounting set
14. Delivery Versions
No. 1821-0000
Twister pro
, 230 V, 50-60 Hz,
incl. 500 ml mixing bowl with paddle
No. 1821-1000
Twister pro
, 120 V, 50-60 Hz,
incl. 500 ml mixing bowl with paddle
15. Accessories
No. 1821-0100 Stand for benchtop device
WxHxD: 230 x 680 x 290 mm
[9.062 x 26.772 x 11.426 inch]
No. 1820-0200 Bowl, incl. paddle
200 ml
No. 1820-0210 Paddle
200 ml
No. 1820-0220 Mixing bowl
200 ml
No. 1820-0500 Bowl, incl. paddle
500 ml
No. 1820-0510 Paddle
500 ml
No. 1820-0520 Mixing bowl
500 ml
No. 1820-0700 Bowl, incl. paddle
700 ml
No. 1820-0710 Paddle
700 ml
No. 1820-0720 Mixing bowl
700 ml
