Press and hold the key of the
program you wish to change for
3 sec.
2
Settings
Name: PROGRAMM
1_
1
Settings
Mixing time
0:30_
3
Press the control knob =
Parameter now in the edit mode
Settings
Mixing time
0:30_
4
Turn the control knob =
Changes the parameter
Settings
Mixing time
1:25_
5
Press the control knob =
Saves the new parameter
Settings
Mixing time
1:25_
Exit the parameter input mode
= Press the program button for
the associated parameter
PROGRAMM 1
Mixing time
1:25
Action:
Procedure:
Display:
Turn the control knob =
Parameter selection
Attachment 1 - Editing / Setting Program Parameters - English
if you have finished yout input, continue with
6
6
*)
*)
*)
*)
*)
Note:
Speed, interval, pre-vacuum and post-
vacuum are programmed analogue to the
„mixing time“ example.
• name (refer to Attachm. 2)
• mixing time
0-5 min.
Please observe the manufacturers’
instructions. In case of silicones do
not use more than 400 rpm otherwise
the filter would plug!
• rpm 150 - 600 rpm
• interval (change in the di-
rection of rot.) 0 - 30 sec.
• prevacuum
0 - 60 sec.
• postvacuum
0 - 60 sec.
