RH-D AND RH-W ELECTRIC DUCT HEATERS
15
1.800.627.4499
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
RENEWAIRE.COM
INSTALLATION
24 V
AC
24 V
AC
Common
0 - 10
VDC
Provide field wiring from these
three terminals to terminal lugs
on RH-W controller. See wiring
schematics 6.4, 6.5 and 6.6 in
this manual.
DIP SWITCH POSITIONS
SWITCH
1
3
6
2
5
4
7
OFF
O
C
INTERNAL SENSOR
RH-W ROOM APPLICATION
REVERSE ACTING OUTPUT
NOT USED
0 - 10 VDC
NOT USED
ON
0
F
NOT USED
NOT USED
NOT USED
FULL SET POINT RANGE
NOT USED
NOT USED
Connect optional Occupancy
Sensor or Timer to terminals
4 and 5. Use Normally
Closed (NC) contacts. When
contacts open (or if no
sensor or timer is present),
thermostat will operate only
in Comfort Mode.
Thermostat Wiring Illustration
DIP Switch Positions
