Applications Engineering
Figure C-3: Load MMI Button
16. Select the MCU device of your
target
board to which you want to connect the RTA-FoUSB-Mon
as an In-Circuit Debugger (not the MCU of the RTA-FoUSB-Mon unit) and click the
OK
button to
load the selected MCU Monitor Image (MMI) to the RTA-FoUSB-Mon.
Figure C-4: Chip Selection Window
17. Unplug the USB Cable, remove the jumper and enclose the board back into its case. Now re-
attach the ribbon cable to your target board and re-connect the RTA-FoUSB-Mon unit to your PC
with the USB cable.
18. After you connect the RTA-FoUSB-Mon to the PC, the FoUSB Programmer should show the
target MCU device name you selected earlier.
RZB-CC16C-ZDK User’s Manual Rev 1.1
30/ 39
December 2006