PCIe2 to S-RIO2 Eval Platform Quick Start Guide 4
April 20, 2015
Integrated Device Technology, Inc.
Formal Status
LED D1 Indicates the link between the host PC and Tsi721 is active.
Connecting AMCs
Insert AMC modules into the card guide assembly component-side-down. Push the module in the AMC connector gently until
the module snaps in the connector.
The evaluation platform uses a Hot Swap controller to control current flow to the AMC module. Current will be applied to the
module only when the Presence Detect pins (PS0 and PS1) of the module make contact.The fans will turn, a green LED (D3)
will indicate power has been applied to the modules, and the AMC ENABLE signal will be asserted.
If the LED does not turn on after the module is inserted, verify that the module is fully pushed in.
The current limit per AMC connector is 6.25A for the 12V rail, and 165mA for the 3.3V management power pin.
The evaluation platform does not have an IPMI (Intelligent Platform Management Controller). AMC modules that require IPMI
control to come out of reset may not work with the evaluation platform.