SMARC EVK of RZ/G2L, RZ/G2LC, RZ/G2UL, RZ/V2L, and RZ/Five
Start-up Guide
R01US0556EJ0102 Rev.1.02
Page 12 of 37
Jun. 17, 2022
1.3
Booting Flash Writer
Turn on the power of the board by pressing SW9. The messages below are shown on the terminal.
SCIF Download mode
(C) Renesas Electronics Corp.
-- Load Program to SystemRAM ---------------
please send !
Send an image of Flash Writer using terminal software after the message “please send !” is shown. Please refer to the
Table 3 below to know which file name of Flash Writer should be sent.
Table 3. File names of Flash Writer
Board name
File name of Flash Writer
RZ/G2L Evaluation Board Kit PMIC version
Flash_Writer_SCIF_RZG2L_SMARC_PMIC_DDR4_2GB_1PCS.mot
RZ/G2LC Evaluation Board Kit
Flash_Writer_SCIF_RZG2LC_SMARC_DDR4_1GB_1PCS.mot
RZ/G2UL Evaluation Board Kit
Flash_Writer_SCIF_RZG2UL_SMARC_DDR4_1GB_1PCS.mot
RZ/V2L Evaluation Board Kit PMIC version
Flash_Writer_SCIF_RZV2L_SMARC_PMIC_DDR4_2GB_1PCS.mot
RZ/Five Evaluation Board Kit
Flash_Writer_SCIF_RZFIVE_SMARC.mot
Below is a sample procedure with Tera Term.
Open a “Send file” dialog by selecting “File”
→
“Sendfile” menu.
