SMARC EVK of RZ/G2L, RZ/G2LC, RZ/G2UL, RZ/V2L, and RZ/Five
Start-up Guide
R01US0556EJ0102 Rev.1.02
Page 10 of 37
Jun. 17, 2022
1.2.3
Settings
Connect between the board and a control PC by USB serial cable according to the Release Note.
1.
Bring up the terminal software and select the “File” > “New Connection” to set the connection on the software.
2.
Select the “Setup” > “Serial port” to set the settings about serial communication protocol on the software.
Set the settings about serial communication protocol on a terminal software as below:
•
Speed: 115200 bps
•
Data: 8bit
•
Parity: None
•
Stop bit: 1bit
•
Flow control: None
