R36US0002EU0100 Rev 1.00
Page 6
Aug 26, 2021
RTD120D-EVK Evaluation Kit Software Manual
2. In the Serial Port Configuration dialog, set Serial Port # (COM) to the port number the EVK is connected to
(e.g., 4 for COM4). To determine the correct COM port number, you may need to open Device Manager from
the Windows Start menu to observe which COM port appears in response to connecting the USB cable
between the kit and your PC. This port number is remembered whenever you save the control file, so it will
most likely already be correct if you recently connected to the same EVK on this port.
3. Click “Save”, then click “OK”. Communication between DAQFactory and the EVK will start automatically. If you
subsequently disconnect and re-connect the EVK from your PC, then you must complete the following to re-
establish communication:
a. Open the
Communications Monitor
view
MENU: View - Comm Monitor
b. Right-click in the view and select
Configure...
c. Click
Save
.
