R36US0002EU0100 Rev 1.00
Page 14
Aug 26, 2021
RTD120D-EVK Evaluation Kit Software Manual
4. Appendix B: Terminal Mode Commands
The following table provides a list of supported commands available in terminal mode.
Table 2. Terminal Commands
Command
Parameters
Description / Example
?
Show brief help text
o
Turn lamp ON
(overridden by automatic ON/OFF)
f
Turn lamp OFF
(overridden by automatic ON/OFF)
start ppm
Start streaming CO2 concentration
reports, in parts per million (PPM), once
per cycle
stop ppm
Stop streaming CO
2
concentration
reports
set
<param> <value>
set a parameter to a value
set
s1_raw <value>
Set calibration
raw
#1 point
“set s1_raw 1234.56”
set
s2_raw <value>
~
set
s3_raw <value>
~
set
s4_raw <value>
~
set
s1_ppm <value>
Set calibration
ppm
#1 point
set
s2_ppm <value>
~
set
s3_ppm <value>
~
set
s4_ppm <value>
~
set
serial_number <value>
Set serial_number 123
set
filter <value>
Set second stage filter
(default to 8)
set
filter_adc <value>
Set first stage(A/D) filter
(default to 12)
=config1
Report configuration settings (group 1):
▪
SerialNumber
▪ SwRev
▪ s3_raw_interp
▪
droop_factor
▪ digital_filter
▪ digital_filter_adc
