E30A Emulator User
’s Manual
6. Maintenance and Warranty
R20UT0422EJ0501 Rev.5.01
Page 50 of 65
Mar 15, 2016
6. Maintenance and Warranty
This chapter covers basic maintenance, warranty information, provisions for repair and the procedures for requesting a repair.
6.1 User Registration
When you purchase our product, be sure to register as a user. For user registration, refer to “User Registration” of this user's
manual.
6.2 Maintenance
(1) If dust or dirt collects on this product, wipe it off with a dry soft cloth. Do not use thinner or other solvents because these
chemicals can cause the surface coating to separate.
(2) When you do not use this product for a long period, disconnect it from the power supply, host machine and user system.
6.3 Warranty
(1) This product comes with a one-year warranty after purchase.
Should the product break down or be damaged while you’re using it under normal condition based on its user’s manual, it
will be repaired or replaced free of cost.
(2) However, if the following failure or damage occurs to the product under warranty, the product will be repaired or replaced
at cost.
a) Failure or damage attributable to the misuse or abuse of the product or its use under other abnormal conditions.
b) Failure or damage attributable to improper handling of the product after purchase, such as dropping of the product
when it is transported or moved.
c) Failure or damage to the product caused by other pieces of equipment connected to it.
d) Failure or damage attributable to fire, earthquakes, thunderbolts, floods, or other natural disasters or abnormal
voltages, etc.
e) Failure or damage attributable to modifications, repairs, adjustments, or other acts made to the product by other
than Renesas Electronics Corporation.
(3) Consumables (e.g., sockets and adapters) are not covered by the aforementioned repair.
In the above cases, contact your local distributor. If your product is being leased, consult the leasing company or the
owner.
