Renesas R0E00030AKCT00, User Manual

Page: 14 / 65

E30A Emulator User
’s Manual
1. Outline
R20UT0422EJ0501 Rev.5.01 Page 14 of 65
Mar 15, 2016
1.5 Specifications
1.5.1 Product specifications
Table 1.2 lists the product specifications of the E30A emulator.
Table 1.2 Product specifications of the E30A emulator
Item Description
Applicable MCU M16C Family R32C/100 Series
Available MCU mode Single-chip mode
Memory expansion mode
Maximum operating frequency 100MHz (CPU clock)
Emulation memory Not available (internal flash ROM used as emulation memory)
Software break Maximum 256 points (implemented by instruction replacement)
Execution address break Maximum 8 points (execution address/data access)
-
Shared with trace event/time measurement event
- Only address and R/W attribute specifiable for data access break
- One data comparison breakpoint specifiable in software
Hardware break
Combinatorial break point OR/status transition (in forward direction)
Trace mode Trace priority/MCU execution priority specifiable
Trace capacity 8M events (Trace priority) /512 events (MCU execution priority)
Trace contents Branch source and branch destination/conditional branch/data access
Trace event Maximum 8 points/4 area (prefetch address/data access)
-
Shared with break event/time measurement event
- Start/end/extraction event specifiable
Time measurement Execution time (between Go-Stop, 32-bit CPU clock counter in MCU)
Section time, 3 points (between data access, 40-bit counter in E30A)
RAM monitor Specifiable in byte or word units
- pseudo-RAM monitor realized by software (one event used)
Coverage Not available
Simultaneously usable functions
Break
Trace
Time
Measurement
RAM
Monitor
by operation mode
Execution
Address
Data
Access
Address
Range
Data
Comparison
Trace: Trace priority
Yes Yes - - Yes - -
Trace: MCU execution priority
Yes Yes - Yes Yes - -
Time Measurement
Yes Yes - - - Yes -
RAM Monitor
Yes Yes Yes - - - Yes
Writer
- - - - - - -
Host machine I/F USB 2.0 (High Speed)
Target I/F 2-pin (50Ω coaxial cable)
3-pin (via coaxial converter board)
8-pin (via option board)
Target I/F signal NSD, GND (When using coaxial cable/coaxial converter board)
NSD, GND, Vcc1, Vcc2, RESET# (When using option board)
Targetless debugging Not available
Emulator power supply Supplied from the included AC adapter
Target MCU power supply Supplied from a user system
Outside dimension Width: 136.3 mm, depth: 104.0 mm, height: 36.8 mm (except the protruding part)
Weight Approx. 300g
Operating environment Temperature: 5°C to 35°C (no condensation)
Storage environment Temperature: -10°C to 60°C (no condensation)
Overseas standard European EN Standard (EN55022 Class A, EN55024)
American FCC Standard (FCC part 15 Class A)