QB-RL78L1C In-Circuit Emulator CHAPTER 2 SETUP PROCEDURE
R20UT2703EJ0200 Rev.2.00
Page 21 of 42
Jan 31, 2014
Figure 2-1. Acrylic Board Removal Method
As an oscillator
Note
to be mounted in the OSC1 socket in the emulator, use the one that satisfies the following
specifications.
- Supply voltage: 5.0 V
- Output level: CMOS
Note
An oscillation circuit that uses a resonator cannot be used.
Figure 2-2. Oscillator Shape
Figure 2-3. Mapping of Oscillator to Socket
Remark
Insert the oscillator into the socket, take care for the pin 1 position.
Top View
