QB-78F1030
CHAPTER 2 SETUP PROCEDURE
R20UT0289JJ0100 Rev. 1.00
Page 9 of 28
Sep 30, 2010
CHAPTER 2 SETUP PROCEDURE
This chapter explains the QB-78F1030 setup procedure.
Setup can be completed by performing installation setup in the order in which it appears in this chapter.
Perform setup along the lines of the following procedure.
See
2.1 Names and Functions of Hardware
for clock positions.
Clock settings
Hardware settings are not required if the clock internally generated from the emulator is used.
If an oscillator must be mounted, see
2.2 Removal of Acrylic Board
and
2.3 Clock Settings
.
Software settings
See
2.4 Software Settings
.
Mounting and connecting connectors
See
2.5 Mounting and Connecting Connectors
.
Connecting USB interface cable and AC adapter
See
2.8 Connecting USB Interface Cable and AC Adapter
.
Switching power on and off
See
2.9 Switching Power On and Off
.
Connecting QB-78F1030 to target system
See
2.6 Connecting QB-78F1030 to Target System
.
Summary of Contents for QB-78F1030
Page 38: ...QB 78F1030 R20UT0289JJ0100...
