R20UT3282ED0101 Rev. 1.1
8
2015-06-10
In case of a DPS device, VDD can be powered either directly from the
‘banana-type’ connector (
Voltage2
– CN14) or by an on-board voltage
regulator. Thereby even a DPS device can be operated with one single
voltage supply (
Voltage1)
.
The source for VDD is selectable by the jumper JP11. The jumper JP12
connects the voltage, configured by JP11 with the VDD pins.
CAUTION:
Jumper JP12 must not be connected in case of an eVR device. In this
case the connected pins function as VCL pins and must not be supplied with a
voltage.
