M306NKT3-RPD-E User’s Manual
3. Usage (How to Use the Emulator Debugger)
REJ10J0326-0400 Rev.4.00 Sep. 01, 2006
Page 56 of 104
(3) Work area tab
1) Specifying the firmware
Specifying the firmware file
For the radio button of the firmware group box, be sure to click “Default”.
Specifying the work area
Specifies the top address which is used as a work area at the start address
area of the work area group box.
- For details on specifying the work area, refer to “3.2 Setting the Work
Area” (page 51).
- The top address of the work area is set to 2C00h by default.
- In single-chip mode , set the work area address at 10000h.
(4) Memory space expansion tab
Specifying the memory space expansion mode
Because the M306NKT3-RPD-E does not supports Memory Space
Expansion mode, only the radio button “Normal” can be selected.
(5) Clock tab
Specifying the target clock
Specify the clock sources supplied to the MCU (main clock and sub clock).
Select the appropriate clock sources according to the clock used by your
target MCU.
Internal
Emulation pod’s internal clock
External
User system clock
Cancel
Help
Cancel
Help
