M-Station Baseboard
5. Click
Finish
to complete the installation.
If you then plug the M-Station into a high-speed port, you may briefly see the warning messages again,
but they should disappear quickly after the M-Station initializes. Please disregard them.
6.3.4
Uninstalling the USB
Driver
If you installed the driver previously and now want to upgrade to a newer version, you must uninstall
the previous one before installing the new. The procedure for driver uninstallation varies according to
operating system.
Note that if you are upgrading the driver, you will need to delete the driver files as well, otherwise the
Windows operating will reinstall the old driver the next time you connect the M-Station.
6.3.4.1
Uninstalling the USB Driver for Windows 98 or ME
1. Connect the M-Station to your computer.
2. Click
Start
→
Settings
→
Control Panel
→
System
.
3. Select
the
Device Manager
tab.
4. Expand
the
Universal Serial Bus controllers
list.
5. Select
NEC M-Station-USB-IF-1
and click
Remove
.
6. When you see the warning message, click
OK
to remove the device.
7. Disconnect the M-Station from the system.
This procedure alone does not remove the driver files from the system. Therefore, before you can
install an upgrade, you must do the following.
1. Run
Internet Explorer
.
2. Select
the
C:\WINDOWS
directory.
34
