ISL9241EVAL1Z
3. Functional Description
UG184 Rev.3.00
Page 12 of 28
Aug.26.19
7. Switch SW
2
on the evaluation board to the HI position. The load voltage is regulated as an
OTGVoltage
value,
set in Step 4. LED3 is on, indicating the OTG function is enabled.
8. Increase the electrical load slowly and monitor the load voltage. If the load current is less than the
OTGCurrent
limit value, the load voltage is regulated at the setting value.
3.7
Configuring the ISL9241EVAL1Z for Bypass Mode
See
for information about how to transition between different NVDC and Bypass modes. The document
also provides steps on how to enable charging in each mode and how to allow the battery to supplement the
adapter in Bypass mode (reverse turbo boost).
3.8
Supplemental Mode (Intel V
MIN
Active Protection)
See
for information about how to enter Supplemental mode (Intel V
MIN
active protection).
Figure 10. Enabling OTG Function
