22
8. When you use the emulator without connecting it to the user system, ensure that the SW1
jumper pin is inserted to [USER-OFF]. While no pin or SW1 jumper pin is inserted to
[USER-OFF], the emulator supplies 3.3-V power to DrVCC, which is the power supply
exclusively used for USB.
9. To connect the emulator to the user system, ensure that the SW1 jumper pin is inserted to
[USER-ON]. While SW1 jumper pin is inserted to [USER-ON], the emulator does not supply
power to DrVCC, which is the power supply exclusively used for USB. Thus the power must
be supplied from the user system instead.
10. Do not connect a 5-V signal to any pin, including the USB pins. Incorrect usage will cause
damage to the emulator product, user system interface board, and user system.
Summary of Contents for H8SX/1663 E6000H FP-144L
Page 2: ......
Page 4: ......
Page 37: ...H8SX 1663 Group E6000H FP 144L User System Interface Board HS1664ECH61H User s Manual...
