Renesas RA Family
FPB-RA4E1 v1 – User's Manual
R20UT4958EG0100 Rev 1.00
Page 4 of 23
Sep.07.21
1. Board Overview
The FPB-RA4E1, a Fast Prototyping Board for the RA4E1 MCU Group,
enables users to seamlessly
evaluate the features of the RA4E1 MCU group and develop embedded systems applications using Flexible
Software Package (FSP) and the e
2
studio IDE. Users can use on-board features along with their choice of
popular ecosystems add-ons to bring their big ideas to life.
The key features of the FPB-RA4E1 board are categorized in two groups (consistent with the architecture of
the board) as follows:
MCU Native Pin Access
•
R7FA4E10D2CFM MCU (referred to as RA MCU)
•
100 MHz, Arm
®
Cortex
®
-M33 core
•
512 KB Code Flash, 8 KB Data Flash, 128 KB SRAM
•
64-pin, LQFP package
•
Native pin access through 2 x 50-pin male headers (not fitted)
•
MCU current measurement point for precision current consumption measurement
•
Multiple clock sources - Low-precision (~1%) clocks are available internal to the RA MCU. RA MCU
oscillator and sub-clock oscillator crystals, providing precision 24.000 MHz (not fitted) and 32,768 Hz
reference clocks are also available
System Control and Ecosystem Access
•
Two 5 V input sources
USB (Debug, Full Speed)
External power supply (using 2-pin header) (not fitted)
•
Built-in SEGGER J-Link Emulator On-Board programmer/debugger (SWD)
•
User LEDs and buttons
Two User LEDs (green)
Power LED (green) (not fitted) indicating availability of regulated power
Debug/power LED (yellow) indicating power and the debug connection
One User button
One Reset button
•
Two popular ecosystem expansions
Two Digilent Pmod
TM
(SPI, UART) connectors (not fitted)
Arduino
TM
(Uno R3) connectors
•
MCU boot configuration jumper (not fitted)
