Renesas FLASH Development Toolkit 3.07 User Manual Download Page 98

Page: 98 / 146

CKP

This shows the multiplier of the peripheral clock for the input clock.

Clock Mode

This shows the clock mode.

8.5.2

Communications Tab

This shows the default and current baud rates and the current port. It also allows the user to change the Port
and Baud Rate when disconnected.

Figure 8-9

Communications Properties

Port

This drop-down list provides the user with a list of supported COM ports available for connection to the
device. This list includes the USB port options.

Baud Rate

Display the currently selected Baud Rate. Double clicking invokes the Project Wizard to allow editing of
this item.

Default Baud Rate

Display the Default Baud Rate.

Use default baud

Summary of Contents for FLASH Development Toolkit 3.07



















































































































































Search results

Summary of Contents for FLASH Development Toolkit 3.07

Reviews:

Related manuals for FLASH Development Toolkit 3.07

Brands by name

Popular brands

Renesas FLASH Development Toolkit 3.07, User Manual

Search results

Summary of Contents for FLASH Development Toolkit 3.07

Reviews:

Related manuals for FLASH Development Toolkit 3.07

Brands by name

Popular brands