Rev.1.01 2007.02.16
RJJ10J1643-0101
106
RAPI_FALLING
Selects the falling edge of measurement pulse as active edge.
RAPI_BOTH
Selects both rising and falling edges of measurement pulse as
active edge.
RAPI_FILTER_F1
Uses the digital filter facility that has a sampling frequency f
1
.
RAPI_FILTER_F8
Uses the digital filter facility that has a sampling frequency f
8
.
RAPI_FILTER_F32
Uses the digital filter facility that has a sampling frequency f
32
.
RAPI_INT3_TRIGGER
Selects the trigger facility of TC
IN
input.
RAPI_FRING128
Selects the trigger facility of f
RING128
input.
RAPI_OVERFLOW
Enable overflow interrupt.
RAPI_INPUT_CAPTU
RE_A
Enable GRA input capture interrupt.
RAPI_INPUT_CAPTU
RE_B
Enable GRB input capture interrupt.
RAPI_INPUT_CAPTU
RE_C
Enable GRC input capture interrupt.
RAPI_INPUT_CAPTU
RE_D
Enable GRD input capture interrupt.
RAPI_COUNT_CLEA
R_A
Selects GRA input capture to counter clear factor
RAPI_COUNT_CLEA
R_B
Selects GRB input capture to counter clear factor
RAPI_COUNT_CLEA
R_C
Selects GRC input capture to counter clear factor
RAPI_COUNT_CLEA
R_D
Selects GRD input capture to counter clear factor
RAPI_COUNT_CLEA
R_SYNC
Clear counter in sync with the synchronized other timer counter
RAPI_TIMER_SYNC
Synchronize timer on channels A and B.
RAPI_TRD_FILTER_F
1
Use sampling frequency f1 for digital filter function
RAPI_TRD_FILTER_F
8
Use sampling frequency f8 for digital filter function
RAPI_TRD_FILTER_F
32
Use sampling frequency f32 for digital filter function
RAPI_TRD_FILTER_F
Use sampling frequency f for digital filter function
• Specifiable definition values when timer C is used (RAPI_TIMER_C specified)
(Count
source) Specify one from [RAPI_TRD_F1, RAPI_TRD_F2, RAPI_TRD_F4,
RAPI_TRD_F8, RAPI_TRD_F32, RAPI_TRD_F40M]. The default is
RAPI_TRD_F1.
(Operating
states set)
Specify one from [RAPI_TIMER_ON, RAPI_TIMER_OFF]. The default is
RAPI_TIMER_OFF
