UM-PM-029
DA9213, DA9214, and DA9215 Performance
Boards
User Manual
Revision 2.0
25-Feb-2022
CFR0012
14 of 37
© 2022 Renesas Electronics
Stop Program
This terminates the program but leaves it inactive on the screen.
6.2
File Load/Save
Load
Load previously saved text files.
Save
Save current panel state to a text file. Selecting the
Register Dump
option saves the current register
Note 1
There is a difference between
Save
and
Register Dump
.
Save
dumps the contents of all panel
controls to the file (a save state operation), while
Register Dump
reads the device contents (including
status registers) into the file.
6.3
Register Access
This is probably the most important section of the
Configuration Panel
.
CoPMIC slave
Set the slave address of the device. This affects all I
2
C communications. See also the register
INTERFACE in the
Find
Finds a control matching a full or partial register name, a control bit name, a register number (for
example, R208 or D0h). Pressing
Find
repetitively steps through all matching items.
Send
Sends single byte data to I
2
C device using
Slave Address
,
Register Address
, and
Data to Send
.
Read
Reads single byte data from I
2
C device using
Slave Address
and
Register Address
.
