Renault TRIBER 2021, Vehicle User Manual

Page: 98 / 202

Jaune Noir Noir texte
3.18
ENG_UD68141_2
Rear seat ENG (XBC - Renault) ENG_NU_1321-2_XBC_Renault_3
REAR SEATS -THIRD ROW (1/2)
1
2
To remove the third row backrest
– Ensure the seatbelts are properly
stored and lower the headrest fully;
– Pull knob 1 upwards and rotate the
backrest forward to certain angle as
shown in the illustration A ;
– Lift the seat backrest slowly upwards
in the same orientation to disassem-
ble the seat backrest;
– Follow the same steps in reverse-
manner to assemble the seat back-
rest.
NOTE: Gap 3 between third row seat
back and cushion will allow the cus-
tomer to grab the seatback and remov-
ing them.
A B
To remove the third row cushion
Follow the steps after removing the
backrest;
– Pull the strap
2 and lift the cushion
vertically to a certain angle as shown
in illustration B ;
– Lift the seat cushion upwards in the
same orientation to disassemble the
seat cushion. Ensure that the mount-
ing brackets comes out completely
from the floor on both ends;
– Follow the same steps in reverse
manner to assemble the seat cush-
ion
When refitting the seat-
back, make sure it is cor-
rectly locked in place.
If seat covers are fitted,
make sure these do not prevent
the seatback latch from locking in.
Make sure that the seat belts are
positioned correctly. Reposition the
headrests.
3