Renault R-Link 2, Manual

Page: 53 / 146

settings
navigation........................................(up to the end of the DU)
overspeed warning ................................................(current page)
2.19
ENG_UD51457_8
Réglages de navigation (R-Link 2 - Renault)
Navigation settings
naVigation settings
(1/3)
“settings” menu
From the “Navigation” menu, press
“Settings”, then select the subcategory
you wish to change:
– “Sound and warnings”;
– “Route”;
– “Traffic”;
– «Map settings»;
– “Visual guidance”.
“safety warnings”
This menu enables you to activate or
deactivate the various safety warn-
ings and to set them in order to ac-
tivate a sound and/or visual alarm
when approaching certain locations
such as schools, level crossings,
hazardous areas, etc.
You can programme the navigation
system so that it displays these in-
creased vigilance points on the map,
and so that you can be warned by
a beep when you approach these
areas.
For some of these areas, there is a
legal or recommended speed limit.
The beep may differ depending on
whether you are driving under or over
the speed limit.
Choose to be warned when ap-
proaching these increased vigilance
areas or only when you are exceed-
ing the speed limit.
“sound and warnings”
This menu allows you to define the
synthetic voice in the multimedia
system, the various sounds and the
navigation warnings.
“navigation voice”
This menu enables you to adjust the
following settings:
– choosing the synthetic voice;
– adjusting the synthetic voice to;
– Choosing the language of the syn-
thetic voice.
To reset your data and go back
to the default settings, press the
pop-up menu button, then “Reset”.
In certain countries it is illegal to ac-
tivate the camera warning option
and this could lead to prosecution.