manualshive.com logo in svg

Renault MEGANE COUPE CABRIOLET, Driver'S Handbook Manual

Share
Download
Renault MEGANE COUPE CABRIOLET Driver'S Handbook Manual Download Page 85

1.79

FUEL TANK 

(3/3)

No modifications what-

soever are permitted on 

any part of the fuel supply 

system (computers, wiring, 

fuel circuit, injector, protection 

covers, etc.) as this may be danger-

ous (such work must be undertaken 

by qualified Network personnel).

Running out of fuel on diesel 

versions

Vehicles with priming bulb

 

2

After a breakdown caused by com-

pletely running out of fuel, the system 

must be reprimed before the engine is 

restarted: 

Fill the tank with at least 8 litres of 

diesel fuel.

Press priming bulb 

2

 several times.

The engine can now be restarted.

If the engine does not start after several 

attempts, contact an approved Dealer.

Vehicles without priming bulb 

2

Insert the 

RENAULT

 card into the card 

reader. Press the button without press-

ing any of the pedals. Wait a few min-

utes before starting. This will enable the 

fuel circuit to be primed. If the engine 

does not start, repeat the procedure.

2

Summary of Contents for MEGANE COUPE CABRIOLET



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands