manualshive.com logo in svg

Renault MEGANE COUPE CABRIOLET, Driver'S Handbook Manual

Share
Download
Renault MEGANE COUPE CABRIOLET Driver'S Handbook Manual Download Page 127

2.41

When setting off,

 if the lever is locked 

in position 

P

 even though you are de-

pressing the brake pedal and pressing 

unlocking button 

2

, the lever can be re-

leased manually. To do this, press the 

button by inserting an object into the 

hole 

10

 and simultaneously press un-

locking button 

2

 located on the lever.

AUTOMATIC TRANSMISSION 

(3/3)

Operating faults

–

 

When driving

, if the “Check auto 

gearbox” message appears on the 

instrument panel, it indicates a fault.
Contact your approved Dealer as 

soon as possible.

–

 

When driving

, if the message “Auto 

gearbox overheating” appears on the 

instrument panel, stop the vehicle to 

allow the gearbox to cool down.
Contact your approved Dealer as 

soon as possible.

–

 

If a vehicle with an automatic 

gearbox breaks down,

 refer to the 

information on “Towing” in Section 5.

10

2

Summary of Contents for MEGANE COUPE CABRIOLET



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands