commande vocale (jusqu’à la fin de l’UD)
repère vocal (page courante)
aide à la reconnaissance vocale (jusqu’à la fin de l’UD)
69
ENG_UD5022_2
Utiliser la commande vocale (XNX - Renault)
ENG_NX_806-2_NX_Renault_0
Commande vocale
Utiliser la commande vocale
using voice coMMands
Voice recognition allows you to con-
trol certain functions of the system by
voice
activation/interruption
activation
Press
20
to activate voice recognition
A few main commands are displayed
on the screen
After the bleep, say the required voice
command (refer to the table of com-
mands below) The command is con-
firmed by an audible reply
To return to the previous command, say
“correct”
When no command is spoken, the
system sounds a second bleep If this
is followed by silence again, the func-
tion will deactivate
interruption
To briefly interrupt voice recognition,
say “pause” To reactivate it press
20
To interrupt voice recognition, say
“cancel”
Help
To display the list of commands, press
20
and say “navigation help”, “phone help”
or “voice recognition help”
Rotate
26
to run help and select your
voice command Press
20
and say your
command
voice tags
Voice tags make it possible to:
– make a call to a stored number more
quickly;
– to launch guidance to a stored des-
tination in the address book more
quickly
Recording a voice tag when creating an
entry or when editing:
– a phone number (refer to the section
on “Phonebook”);
– an address in the address book (for
this, refer to the section on “Managing
the address book”)
note:
a voice tag can only be recorded
when the vehicle is stationary
