background image

How to install and use the Safe-Release

 Device

It is the responsibility of both the blind maker and installer to check and confirm the blind is  

safe according to the standards. We advise you keep these instructions for future reference.

2

3

1

6

5

4

4

7

Side View

Side View

Below View

2

3

1

6

5

4

4

7

Side View

Side View

Below View

rca-uk.com

To avoid strangulation and entanglement, keep 

cords out of the reach of young children. Cords 

may become wrapped around a child’s neck. 

Move beds, cots and furniture away from window 

covering cords. Do not tie cords together, make 

sure cords do not twist and create a loop.
Installing this device reduces the hazards of 

strangulation or entanglement as the Wheel and 

Chain will release from the Gear Housing to meet 

the 6kg testing requirement. Using this device 

removes the need for wall fixed chain tension 

devices and allows chains to be fitted 60cm from 

the ground. The use of this and other child safe 

devices help reduce the risk of strangulation, but 

vigilance is always required.

Go to 

www.makeitsafe.org.uk for further details.

WARNING

Young Children can be strangled by loops in pull cords, 

chains, tapes and inner cords that operate the product.

Make sure you wrap the operating chain round 

the Safe-Release wheel (

fig

 

1

) before you insert 

into the chain housing. Then squeeze the spring 

side of the wheel (

fig

 

2

) and push the wheel & 

chain into the slot – with the spring wheel facing 

towards the mechanism (

fig

  ). When fully 

inserted the pivot lock can be closed (

fig

  ). 

If not inserted already, the housing simply  

slides into the headrail as shown above (

fig

  )  

NOTE: Make sure that the Axle Bar connection 

screw is positioned correctly and the tab lock 

is open. When fully inserted and flush with the 

headrail twist the tab lock to secure (

fig

  ) and  

fix the Axle Bar via the screw from below (

fig

  ).

CHILD SAFE

APPROVED

The Wheel and Chain will release from the Gear Housing to meet the 6kg testing 

requirement. It’s simple to reconnect – just follow steps 

1

 to   as shown above.

6kg

CHILD 

SAFE  

BREAK 

POINT

Reviews: