Renac ESC3000-DS, Manual

Page: 25 / 46

25

NOTE!

Do not place the sensor on the N Wire or the earth wire.

Do not place the sensor on the N and L wire simultaneously.

Do not place the sensor on the L wire going to the consumer.

Do not place the sensor with the arrow pointing to the generation
meter.

Do not place the sensor on the non-insulated wires.

Do not place the sensor on the non-insulated wires.

The sensor can be upgraded to meter.

With a single phase meter provided by Renac Power can monitoring
the 24hr usage of electric.
6.7.4 EPS Connection
The ESC-Hybrid inverter has on and off grid function, the inverter will have output through the
grid output when the grid is on, and will have output through the EPS output when the grid is off.
This function can be achieved manually or automatically according to user’s wishes. If user
wants to use the off grid function manually, it need to be installed an external switch. Please refer
to specific wiring diagram in Figure 2-1 of chapter 2.1. and on how to connect this external switch,
the details please refer to
“EPS Box user manual” .

NOTE!
In case of discrepancies between wiring mode of local policy and the operation
guide above, especially for the wiring of neutral line, grounding and RCD,
please contact Renac Power before any operation!