REMS Akku-LED-Lampe, Instruction Manual

Page: 10 / 116

eng
2.3. Stationary application
Stand the REMS cordless LED lamp on the battery (4) or hang it up on a suitable device (5),
e.g. on a hook. Point the lamp head (1) at the place to be illuminated. The lamp head (1) can
be continuously swivelled by 145°.
3. Operation
Switch on the REMS cordless LED lamp by pressing the On/Off switch (2). Switch off the REMS
cordless LED lamp by pressing the On/Off switch (2) again.
Low discharge protection
The REMS cordless LED lamp is equipped with a low discharge protection. This switches the
REMS cordless LED lamp off as soon as the battery needs recharging. In this case, press the
On/Off switch (2) once, remove the battery and charger with the REMS rapid charger.
4. Maintenance
The REMS cordless LED lamp is maintenance-free.
WARNING
Remove the battery before cleaning!
Only clean plastic parts (e.g. housing, plastic window, batteries) with mild soap and a soft, damp
cloth. Do not use household cleaners. These often contain chemicals which can damage the
plastic parts. Never use petrol, turpentine, solvent or similar products for cleaning plastic parts.
Liquids may never be allowed to penetrate inside the REMS cordless LED lamp. Never immerse
the REMS cordless LED lamp in liquids.
5. Disposal
The REMS cordless LED lamp may not be thrown in the domestic waste after use. It must be
disposed of properly by law.
6. Manufacturer’s Warranty
The warranty period shall be 12 months from delivery of the new product to the first user. The
date of delivery shall be documented by the submission of the original purchase documents,
which must include the date of purchase and the designation of the product. All functional defects
occurring within the warranty period, which are clearly the consequence of defects in production
or materials, will be remedied free of charge. The remedy of defects shall not extend or renew
the warranty period for the product. Damage attributable to natural wear and tear, incorrect
treatment or misuse, failure to observe the operational instructions, unsuitable operating mate-
rials, excessive demand, use for unauthorized purposes, interventions by the customer or a
third party or other reasons, for which REMS is not responsible, shall be excluded from the
warranty.
Services under the warranty may only be provided by customer service stations authorized for
this purpose by REMS. Complaints will only be accepted if the product is returned to a customer
service station authorized by REMS without prior interference in an unassembled condition.
Replaced products and parts shall become the property of REMS.
The user shall be responsible for the cost of shipping and returning the product.
The legal rights of the user, in particular the right to make claims against the seller under the
warranty terms, shall not be affected. This manufacturer’s warranty only applies for new prod-
ucts which are purchased in the European Union, in Norway or in Switzerland.
This warranty is subject to German law with the exclusion of the United Nations Convention on
Contracts for the International Sales of Goods (CISG).
7. Spare parts lists
For spare parts lists, see www.rems.de → Downloads → Parts lists.