v1.1
UM-R8XDLIM-HY-01
Page 34
Dual Band ICS Repeater User Manual
3.
When the battery is charging, the LED would have a solid light.
4.
When the battery is removed, the LED would be OFF.
Buttons
All the buttons need to be pressed via a thin rod sticking into the button holes.
RESET Button
: Press the RESET button once, and the MCU of the repeater would
restart, while all the repeater settings would remain the same, which means the
repeater settings would be same as the settings before the RESET button is pressed.
NMI Button
: Press the NMI button and hold it down for 10 seconds before releasing
the button. It is used to set the whole repeater settings back to factory default settings.
BAT. Button
: Two situations
1.
When the repeater has no external power and is OFF, press the BAT. Button to
enable the battery to start up the MCU, but the repeater RF part is not working.
The BAT. LED flashes slowly.
2.
When the repeater is switched OFF. The battery would still provide power for the
MCU, but the RF part of the repeater is not working at this time. Press the “BAT.”
Button, the BAT. LED flashes for 10 seconds, then battery power would be
switched OFF.
Ports and Slots
Figure 17
Ports / Slots
Type
Function
1
Micro USB port
For USB cable connection
When micro USB cable is being
used as the local connection
method, connect the micro USB
cable to this port.
2
RJ45 port
For Ethernet cable
connection
For debug use only.
