Universal System Controller
T3-V
20
CHaPTer 3 | OPeraTiOn
TilT SWiTCH
This button displays a window that allows you to adjust the settings for
the built-in tilt sensor. The tilt switch is a motion detector that turns the
remote on when activated.Press the OK button when finished.
On
means the tilt switch is active and will wake-up the T3-V when it is
moved.
Off
means the tilt switch is inactive.
Time OUT
This button displays a window that allows you to adjust the amount of time
the unit stays awake after the last button press. The time is variable from
second to 20 seconds (the default is 0 seconds). Press the arrows to
the left or right of the Time Out setting to adjust the time. Press the OK
button when finished.
Note: This setting can have a significant effect on the run-time of the T3-V
between battery charges. During Sleep mode, the T3-V uses virtually no
battery power.
