It’s Under Control
®
CHaPTer 2 | inTrOdUCTiOn
FeaTUreS
The T3-V provides superior quality and reliability as well as these features:
Ergonomic design permits effortless, one-handed operation.
Full VGA resolution (80x0) color TFT LCD to display custom buttons,
text, graphics and animations.
Integrated high-resolution touchscreen.
Nineteen assignable/programmable keypad buttons.
Three-way rocker switch for scrolling list navigation.
Integrated 802.g wireless Ethernet.
Tilt switch can automatically turn on the backlight when picked up.
Extremely bright, backlit display and keypad.
Intuitive layout of keypad buttons for commonly used functions.
Transmits IR and RF (or both - on a single button press!).
Optional RF receiver allows you to transmit through walls, cabinets, etc.
System includes a Lithium-Ion battery and docking station.
Completely customizable and programmable.
Extremely wide IR transmitting frequency range.
Optional ‘Voltage’ and ‘Video’ sensing modules to monitor power status
of equipment.
Optional interface for RS-232 controlled equipment.
Non-volatile Flash memory stores your system configuration even when
power is not present.
Field upgradable firmware.
USB Programming.
imPOrTanT nOTeS
Please read these important notes about the T3-V:
The T3-V should be placed in an area where it is around normal room
temperature (between 0° F to 90° F). If the temperature is too hot,
the display appears dim. If the temperature is too cold, the display
appears dark and may respond slowly.
Do not use sharp objects on the touchscreen. It is designed to operate
with a touch of your finger.
Do not let the T3-V get wet. It should not be handled with wet hands or
placed in an area where it could get wet.
Do not subject the T3-V to smoke, dust, or vibrations. The display may
be damaged from excessive shock or vibration.
Only use the power supply that is provided with the T3-V. Using the
wrong type of power supply may result in damage to the battery or
electronic components.
Do not disassemble the unit. Service of the T3-V should be performed
by authorized personnel only.
