REMKO WKF 120 compact, Assembly Instruction Manual, Page: 11 / 20

Fig. 17: Connecting Wilo-pump
13. Take the servo motor for the 3-way valve,
which is included in the delivery and install it
on the valve body (Fig. 18). Use a plug to
connect the motor to the cable designated
A10 (Fig. 19).
Fig. 18: Install the servo motor
Fig. 19: Connect the servo motor
14. Connect the last three corrugated pipes
included in the delivery to the domestic water
connections of the storage tank on the front
left (Fig. 20 A) and install them upwards
through the openings provided for them in
the casing cover (Fig. 20 B)
Circulation = 4
HW outlet = 3
CW inlet = 5
Use seals!
If the connection is not used for a circulation,
it must be properly sealed to the storage tank
directly.
A B
2
1
4
3
Fig. 20: Domestic water connection
1: Hot water outlet
2: Circulation
3: Drain valve
4: Cold water inlet
15. Note for installing the front casing
Fix the connection pipes in such a way that
they are not below the front panel but are
installed on the side of the storage tank.
(Fig. 21)
11