The illustration of the LCD with all of the sym-
bols present is only intended to provide a
clearer overview. During operation, only those
symbols relevant to the respective functions
appear on the display.
Key functions
A symbol is shown on the display to indicate that
the settings are being transferred.
"Auto" mode
Make sure that the indoor unit is connected to the
power supply, and is switched on.
The operating mode indicator on the display of the
indoor unit begins to flash.
1.
Press the
"MODE"
key to select "Auto" mode.
2.
Press the
"UP/DOWN"
key to set the desired
temperature. The temperature can be set
between 17 and 30°C, in increments of 1°C.
3.
Press the
"ON/OFF"
key to switch the air
conditioning unit on.
1
3
2
Fig. 8: "Auto" mode
In "automatic" mode, the cooling unit automati-
cally selects among cooling, recirculation and
heating operation and tries to reach the setpoint
set on the remote control
"Cooling", "Heating" and "Recirculation" mode
Make sure that the indoor unit is connected to the
power supply, and is switched on.
1.
Press the
"MODE"
key to select from oper-
ating modes "Cooling", "Heating" or "Recircu-
lation".
2.
Press the
"UP/DOWN"
key to set the desired
temperature. The temperature can be set
between 17 and 30°C, in increments of 1°C.
3.
Press the
"FAN"
key to select from the four
fan speeds (Auto, slow, medium and fast).
4.
Press the
"ON/OFF"
key to switch the air
conditioning unit on.
1
4
2
3
Fig. 9: "Cooling", "Heating" and "Recirculation"
mode
15
Summary of Contents for SKT 261
Page 4: ...13 General view of unit and spare parts 51 14 Index 53 REMKO SKT series 4...
Page 54: ...REMKO SKT series 54...
Page 55: ......
