background image

Subject to technical modifications, no r

esponsibility taken for the corr

ectness of information!

Consultancy

Intensive training means 
our consultants are always 
up-to-date with the latest 
developments. This has given 
us the reputation of being more 
than just a good and reliable 
supplier:  
REMKO, a partner who helps 
solve problems.

 

 

Sales

REMKO not only has a well-
established sales network 
at home and abroad, it also 
employs highly trained sales 
specialists.  
REMKO Our field staff are more 
than just salesmen: above all, 
they must advise our clients in 
the areas of air conditioning and 
heating technology. 

Customer Service

Our equipment is precise and 
reliable. However, should a fault 
should occur REMKO customer 
service is quickly at your side. 
Our comprehensive network of 
experienced dealers guarantees 
quick and reliable service.

REMKO GmbH & Co. KG. 
Klima- und Wärmetechnik

Im Seelenkamp 12 · 32791 Lage 
Postfach 1827 · 32777 Lage 
Telephone  

+49 5232 606-0 

Fax  

+49 5232 606-260 

E-mail  

[email protected] 

Internet  

www.remko.de

Hotline

 

 

+49 5232 606-0

Export 
+49 5232 606-130

REMKO ACROSS EUROPE

… and in your area!

Profit from our experience and advice

Summary of Contents for RXD 1200





























Reviews: