1
2
7
6
3
4
5
Fig. 46: Connecting the indoor unit
1: Plastic cover
2: Electrical drawing
3: Power supply connection terminals
4: Strain relief
5: Communication line to outdoor unit
6: Plastic cover
7: Cable fastening possibility
Check all plugged and clamped terminals to verify that they are seated correctly and make permanent
contact. Tighten as required.
8.3 Outdoor unit connection
Proceed as follows to connect the line:
1.
Remove the unit cover.
2.
Remove the side panel at the connection.
3.
Choose the cable cross-section in accord-
ance with the relevant specifications.
4.
Feed both cables through the edge protec-
tion rings on the fixed connection panel.
5.
Connect the lines as shown on the electrical
connection diagram.
6.
Fix the line in the strain relief and re-
assemble the unit.
37
