background image

Description of Device 

 
The room air-conditioners in the REMKO RKV 10 W,  
13 W, 18 W and RKV 24 W series are split-design, wall-
mounted, direct-condensing units. 
The way the air conditioning system works is quite sim-
ple; warm air is removed from the room to be cooled. 
The environmentally-friendly refrigerant R 407C trans-
ports this warmth just as it does for all other REMKO 
air-conditioning products. 
The units primary function is to air-condition rooms. 
They also filter and dehumidify the air, thus creating a 
comfortable climate in the room. The units also have a 
pure ventilation and dehumidification mode. 
All units operate fully-automatically and offer a range of 
other options thanks to their microprocessor control. 
They are operated using the supplied infrared remote 
control.

 

Safety Hints 

 
Extensive tests have been conducted on the material, 
functionality and quality of these units before they were 
shipped. These units may only be used in accordance 
with their intended purpose. Hazards may arise if the 
units are used improperly. 

Please make sure to follow these safety instructions. 

à

Never operate the indoor unit outside or without the 
air filter. 

à

Make sure that personnel trained in the operation of 
the air conditioner check the unit for visible defects 
on the operating and safety mechanisms each time 
before putting it into operation. 

à

Before performing any work on the unit, the power 
cord must be unplugged and the unit secured 
against being switched on by unauthorised persons. 

à

Operate the units only when assembled and for their 
intended purpose. 

à

Keep in mind that it is dangerous to remove covers 
protective grilles, etc., during operation; this can lead 
to uncontrolled operating situations. 

à

The indoor unit and the outdoor part of the REMKO 
air-conditioners have been technically adjusted to 
one another.

       

If third-party components are used, the guarantee 
becomes null and void.

 

à

Operate the units exclusively within the permissible 
operating ranges.         

Pay attention to surrounding temperatures. 

à

Make sure that the unit is kept at a safe distance 
from flammable materials. 

à

Do not install the inside unit close to heaters or be-
hind curtains and drapes.        

Maintain the minimum safety distances indicated!

 

à

Ensure that the air intake and outlet openings are al-
ways clear of foreign objects. 

à

Do not insert any objects into the air intake and out-
let openings. 

à

Do not place any objects on top of the units. 

à

Never operate the units in rooms susceptible to ex-
plosions. 

à

The units are also not suitable for operation in rooms 
containing large amounts of dust or aggressive air. 

à

Do not use flammable sprays such as hair spray or 
spray paint in the direct vicinity of the units. 

à

Do not operate the units if the atmosphere is con-
taminated by oil, sulfur or salt. 

à

Do not expose the unit to direct streams of water. 

High-pressure cleaners, etc.

 

à

Protect the indoor unit and the remote control from 
moisture and direct sunlight. 

à

Never open the units’ housing!         

This may cause an electric shock.

 

à

Regularly check that condensation is not blocked 
from flowing out of the unit. 

à

Make sure that the outdoor part is equipped with a 
safety mechanism which prevents the condenser 
from being damaged caused by the unit switching 
back on right away after it has been switched off.

 

The unit may only be switched back on after 3 min-
utes.

 

à

Cleaning and minor maintenance work made only be 
performed by the operator or an authorised person 
designated by him in accordance with the instruc-
tions contained in the section "Maintenance and 
Service". 

à

All REMKO air conditioners are supplied with the en-
vironmentally-friendly refrigerant R 407C. 

à

Installation and repair work may only be performed 
by authorised personnel. 

Transport and Packaging 

 
The unit is shipped in a stable transport box made of 
cardboard. Please examine the unit when it is delivered.  
Make note of any damage or missing parts on the ship-
ping bill and notify the shipping company and your con-
tract partner. 
We do not assume any liability for subsequent com-
plaints. 

Summary of Contents for RKW 10 W





















Reviews: