REMKO MXT 264, Operating And Installation Instructions, Page: 15 / 44

4.4 Keys on the remote control
10
8
11
12
2
1
6
3
7
5
9
4
13
14
Fig. 10: Keys on the remote control
1
“On/Off” key
Press this key to switch the air conditioning unit on
and off.
2
“Arrow up” temperature key
Increases the setpoint in 1 °C steps up to a tem-
perature of max. 30 °C.
3
“SET” key
Makes it possible to switch between different oper-
ating functions as follows:
“Follow me” function ( )
- Network configuration ( )
- “Follow me” function ( )
The selected function flashes in the display, con-
firm with the “OK” key.
4
“Swing” key
Starts and stops the horizontal fin movement.
Press and hold the key for 2 seconds to start the
vertical fin movement (available depending on the
unit model).
5
“Fan speed” key
Allows switching between the different fan speeds
in the following order:
Automatic  Low  Medium  High
Note: To activate the silence function (available
depending on the appliance model) of the appli-
ance, press and hold the key for 2 seconds.
6
“Turbo” key
Activating the turbo function ensures that the set-
point is reached as quickly as possible.
7
“Mode” key
This key allows switching between the different
operating modes in the following order:
Automatic  Cooling  Dehumidifying  Heating

Recirculation
8
“Sleep” key
Activates/deactivates the energy saving function of
the unit (e.g. overnight).
9
“OK” key
Required to confirm various functions of the IR
remote control.
10
“Timer” key
Activates/deactivates the time-delayed start of the
unit or the unit switch-off.
11
“Arrow down” temperature key
Decreases the setpoint in 1 °C steps down to a
temperature of min. 17 °C.
12
“Fresh” key
Activates/deactivates the REMKO BioClean func-
tion (ionisation).
15