Connection of the optional wired remote con-
trol KFB-3
The wired remote control, type KFB-3, can be con-
nected to the devices of the series MXT 264-354.
You need the connection cable that is part of the
delivery scope of the wired remote control for this.
The indoor units are ready to be plugged in for
connection.
The mating connector on the indoor unit can be
found below the electrical connection (Fig. 5). The
plug is colour-coded with the letters A to D.
Fig. 5: Connection KFB-3
4.2 Display on indoor unit
Display
2
1
4
3
5
Fig. 6: Display
1: Receiver infrared signal
2: Operating lamp (green)
3: Timer (yellow)
4: (Pre) heater function/defrosting (green)
5: Manual mode
REMKO MXT series
12
Summary of Contents for MXT 264
Page 42: ...REMKO MXT series 42...
Page 43: ......