6
Installation
1.
Disconnect the power supply.
2.
Connect the 4-core cable to the terminals on
the rear side.
3.
Mount the room temperature controller on the
wall at a height of approx. 1.5m.
4.
Choose an installation location that is guar-
anteed good air circulation and is not
affected by any sources of heat or cold.
5.
Make the connections in accordance with the
electrical circuit diagram. Electric connec-
tions must be carried out as fixed connec-
tions in accordance with the applicable regu-
lations!
6.
Check the terminal points for stability.
7
Commissioning
1.
Switch the unit on using the room tempera-
ture controller.
2.
Check all functions.
3.
Install all removed parts.
4.
Familiarise the operator with the functions.
REMKO KFB 3
10
Summary of Contents for KFB 3
Page 15: ......