"TIMER" Button
Press this button to activate the
automatic switch-on/off time
for the equipment. Buttons
and are used to program
these times at 10 minute
intervals.
"
"
Button
This button increases the value
when setting the clock or timer.
"
"
Button
This button decreases the value
when setting the clock or timer.
"SET" Button
Press this button to activate the
previously set timer.
"
OFF " Button
Press this button to activate a
switch-off timer of 1/2, 1, 2 or
5 hours.
"
TURBO" Button
Press this button to activate
maximum fan speed for 30
minutes.
"CLOCK" Button
Press this button to activate
clock setting mode.
"
DISP" Button
Press this button to send the
current temperature of the
remote control to the indoor
unit using the I-Feel function.
"
ION" Button
Press this button to switch on
the ion generator.
1. Automatic mode
In this mode the equipment is
running in cooling mode.
2. Cooling mode
In this mode the room air is
cooled to the preset target
temperature.
3. Heating mode
Heating mode is not supported.
4. Circulation mode
In this mode the room air is
circulated.
5. Dehumidifying mode
In this mode the room is
mainly dehumidified, the set
temperature is maintained.
"FAN" Button
Press this button to set the
required fan speed. 4 levels
are available: Automatic, high,
medium and low fan speed.
"
I FEEL" Button
Press this button to change
the point of room temperature
measurement to the remote
control.
The temperature measured
by the remote control is then
sent at regular intervals to the
indoor unit.
"
"
(SLEEP) Button
Press this button to activate
sleep mode. In cooling mode,
the target temperature is
automatically raised by 1
°C after 1 hour.
After the
2nd hour, the temperature
automatically increases/
reduces by 2°C. This function
deactivates itself after 6 hours.
" " (SWING) Button
This button activates the
oscillating fin function
to provide improved air
distribution in the room.
Buttons on the remote control
Buttons on the remote control
"ON/OFF" Button
Press this button to start the
equipment.
"
"
Button
Press this button to reduce the
desired temperature to a value
as low as 16 °C.
"
"
Button
Press this button to increase the
desired temperature to a value
as high as 30 °C.
"
MODE" Button
Press this button to select the
operating mode. The indoor unit
has 5 modes:
7
Summary of Contents for ATY 261
Page 2: ......
Page 27: ...Notes...
