6
Folding Charging Stand
Rotate open to hold the shaver while charging. The stand collapses down around
shaver for travel or storage.
Travel Lock
To engage the travel lock press and hold the on/off button for 3 seconds. The LCD
display will flash 5 times to indicate the lock is set. While the travel lock is set, if the
on/off button is pressed the LCD display will flash 3 times to indicate the shaver is
on travel lock mode. To turn the travel lock off, press and hold the on/off button for
3 seconds. The LCD display will flash 3 times while the button is being pressed and
then the shaver will turn on.
CHARGING
1. Plug power cord adaptor into the charging stand (Diagram A).
2. Place the shaver into the charge stand (Diagram B).
3. Plug the adaptor into the wall outlet (Diagram C).
4. Charge shaver for 24 hours before its first use. This first charge is important
to the shaver’s battery life.
Note: During the initial charge ignore the electronic indicators as
they are in “Start Up Cycle”.
CAUTION
•
Make sure the shaver and your hands are dry when charging the shaver.
•
Always charge the shaver in a cool, dry place.
SHAVING
1. Press power button to turn on.
2. Shave face and neck using short, circular strokes.
3. After shaving, turn the shaver off.
C
Summary of Contents for XR1470AU
Page 8: ......
