![background image](http://html1.mh-extra.com/html/remington/xr1410au/xr1410au_use-and-care-manual_1437727010.webp)
CLEANING & MAINTENANCE
NOTE:
When cleaning your shaver, make sure the shaver is turned off and
disconnected from the power cord.
The shaver is a washable appliance. The head and body may be cleaned under warm water.
CAUTION:
•
When cleaning the external surfaces of the shaver, do not use strong
detergents or other chemicals.
•
To dry, wipe the surface of the shaver with a dry towel. Do not use a hair dryer
or heater to dry the shaver.
NOTE:
The shaver head and neck assembly is designed to be detachable from the
shaver body. Simply pull upwards from the neck of the shaver for easy release.
To reattach the neck, align it with the neck attachment cavity so that it clips back
into position.
CLEANING YOUR SHAVER
DAILY CLEANING
1. Locate the detachment grooves on the head & cutter assembly. Gently pull to
detach the hair pocket from the neck assembly (Diagram C).
2. Tap out excess hair shavings (Diagram D).
3. Rinse the head of the shaver in running water.
4. Gently reattach the hair pocket to the neck assembly until it locks in place
on all three sides. The hair pocket may be reattached in any configuration
(Diagram I).
10
SHAVER PARTS
1. Head & cutter (hair pocket) assembly
2. Detachment grooves
3. Neck assembly
4. Neck attachment cavity
1
2
3
4
Summary of Contents for XR1410AU
Page 8: ......