5
CARE FOR YOUR SHAVER
To ensure long lasting performance of your shaver, clean the head assembly regularly. The
easiest and the most hygienic way to clean the shaver is by rinsing the shaving head after
use with warm water.
AFTER EACH USE
• Ensure the shaver is turned off.
• Press the side release button to slip open the head assembly.
• Blow any loose debris from the foil.
• Brush or rinse any accumulated hair from the main body of the shaver, head assembly
and cutter assembly.
• Leave the head assembly open to allow the shaver to dry completely.
NOTE
• The lady shaver is suitable for use in the bath or shower.
• Do not rinse with water hotter than 70°C.
• Do not completely submerge the lady shaver in water.
• Ensure that the lady shaver is turned off when cleaning.
• Do not clean the shaving foils with the brush.
• At regular intervals, put a drop of sewing machine oil onto the foils and cutter heads.
REPLACING YOUR FOIL AND CUTTERS
• To ensure the continued highest quality performance from your shaver, we recommend
that the foil and cutter are replaced every 6 months. These can be obtained from our
nearest Remington* Service Centre.
• Signs that your foils and cutters need replacing.
• Irritation: as foils get worn, you may experience skin irritation.
• Pulling: as the cutters wear, your shave may not feel as close and you may feel the cutter
pulling your hair.
• Wear through: you may notice that the cutters have worn through the foils.
TO REPLACE THE FOIL
• Ensure the lady shaver is switched off.
• Remove the foil assembly by pressing the release buttons on either side of the head and
lifting the foil assembly upwards.
• Replace the foil assembly by aligning it with the body of the shaver then clicking it into
place.
CAUTION
• Only hold the plastic to prevent damage to the foil.
• Do not press on the foil when replacing.
Summary of Contents for WSF5060
Page 2: ...2 j k m g i e f l f ...
