Remington WeTech BHT6255, User Manual

Page: 5 / 100

5
,
EXCHANGING THE ATTACHMENTS
• Ensure the trimmer is switched off before changing the trimmer and shaver
attachments.
• Exchange the attachment heads by squeezing the head release buttons on
the groomer body and pulling the head away from the groomer body.
• Attach the desired head by placing on top of the product until it clicks into
place.
• The trimmer head and shaver head can only be attached in one way.
• If it does not go on correctly, turn it around and try again.
, USING THE SHAVER ATTACHMENT
• Hold the shaving head to your skin.
• Stretch your skin with your free hand so hairs stand upright.
• Only apply light pressure on the shaving head whilst shaving.
• Shave against hair growth.
C
CARE FOR YOUR TRIMMER
• Care for your appliance to ensure a long lasting performance.
• We recommend you clean your appliance after each use.
• The easiest and most hygienic way to clean the appliance is by rinsing the
appliance head after use with warm water.
• It is most effective to turn on the unit whilst rinsing to help clear hair.
, AFTER EACH USE
• Turn the appliance off.
• Remove the trimmer head including any fixed combs attached to the main
trimmer head, or shaver head.
• Gently tap on a flat surface to remove hair particles and brush the
remaining hairs away.
• Rinse the accumulated hair from the cutters and shake off excess water,
alternatively, use a small brush.
, CLEANING CAUTIONS
• Do not use harsh or corrosive cleaners on the units or their cutters.
• Do not apply pressure or hard objects to cutters.
• Do not disassemble the cutter assembly.
• Do not use a cleaning brush on the foil of the shaver head as this will
damage the foil.
ENGLISH
GB
D
NL
F
E
I
DK
S
FIN
P
SK
CZ
HUN
PL
RU
TR
RO
GR
SI
AE
HR
UA