DIRECTIONS FOR ATTACHING THE VORTEX
®
JET CONE
ATTACHMENT:
Press the jet cone on the end of the hair dryer barrel until it
snaps into place.
You must line up the ionic vent with the
ionic tube for proper use.
CAUTION: The Jet Cone can become very hot during
use. Let cool before touching the cone.
Vortex
®
IONIC Jet Speed Dryer Features
Pr
oduct
Featur
es
Turbo
Jets
Removable
Jet Cone
Ionic Tube
Product appearance
and colors may vary.
6’ Cord
with Hang Loop
Air Inlet Grille
with
Removable
Lint Filter
Heat –
High, Cool, Low
Speed –
High, Low, Off
Ionic Vent
The revolutionary Vortex
®
Jet Speed dryer’s patented airflow
gently lifts and surrounds your hair with comfortably heated air.
Your hair dries more quickly and with less damage.
MAINTENANCE INSTRUCTIONS
1. Do not attempt to repair the appliance yourself.
Return to Remington Customer Service.
2. Keep all intake openings clear of dust
accumulation. See “Cleaning Instructions” below.
No other maintenance or lubrication is required.
3. If the cord becomes twisted due to use, periodically
straighten. Store appliance and cord where they will
not be damaged.
Do not wrap cord around dryer.
CLEANING INSTRUCTIONS
1. The dryer needs minimum maintenance to ensure
best performance and long life.
2. The intake grille should be cleaned regularly since a
dirty or clogged grille will impair the efficiency of the
dryer.
3. To clean grille, make sure dryer is turned off and plug
is pulled out of socket. Gently pull the air inlet grille off
the dryer and use a soft bristle brush to gently remove
any particles that are lodged in grille openings. If unit is
dirty, wipe clean with a damp cloth. Replace the air
inlet by simply sliding it back on after cleaning.
STORAGE
When not in use, unplug the unit. Allow it to cool and store
out of reach of children in a safe, dry location.
Never wrap cord around the appliance, as this will
cause the cord to wear prematurely and break. Handle
cord carefully for long life and avoid jerking, twisting
or straining, especially at plug connections.
The revolutionary Vortex
®
Jet Speed dryer’s patented
airflow gently lifts and surrounds your hair with
comfortably heated air. Your hair dries more quickly
and with less damage.
HOW TO USE:
After washing hair, blot with a towel. Never rub hair as this
causes tangles. Brush or comb out any tangles.
Choose the heat and speed setting that best fits your hair
type or styling technique.
Hold the dryer
within 3 inches of the
head
in order for the Vortex
®
Jet Cone to
enable the lift and dry airflow action.
The Vortex
®
jet cone can be removed for
sectional and spot styling. Be sure the
unit is turned off and unplugged from the
outlet before removing the attachment.
Hold the dryer approximately 3” away
from your hair for
concentrated airflow
for spot styling, (that is where the air
streams meet at a common point).
Style and dry as normal using the Cold
Shot button to set longer-lasting styles.
How
T
o
Use
