Remington Tribal 1800W, Instructions Manual

Page: 6 / 9

ENGLISH
4
WIRING INSTRUCTIONS UK Plugs Only
This product is fitted with a BS1363 plug fused at 13A. If the plug is unsuitable, it should be
disconnected and an appropriate plug fitted as detailed below. If it is necessary to replace
the plug fuse, use only fuses that are approved to BS1362, rated at 13A. If in doubt consult a
qualified electrician.
The wires in the mains lead are coloured in accordance with following code:
BLUE – NEUTRAL
BROWN - LIVE
As the colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked ‘N’ or
coloured BLACK. The wire which is coloured BROWN must be connected to the terminal
which is marked ‘L’ or coloured RED. Never connect either of the wires to the big EARTH
terminal marked ‘E’ or coloured GREEN or GREEN AND YELLOW.
080635 REM IFU D1001_22L.indd GB_4 080635 REM IFU D1001_22L.indd GB_4 28.10.2008 11:06:50 Uhr 28.10.2008 11:06:50 Uhr
PROTECT THE ENVIRONMENT
For further information on recycling see www.remington-europe.com
Do not dispose of the product in household waste at the end of its life. Disposal can take place at
the Remington® Service Centre or appropriate collection sites.