ENGLISH
3
Do not use any attachments with this hairdryer, other than those supplied by Remington
®
.
Avoid allowing any part of the hairdryer to contact the face, neck or scalp.
This appliance is not intended for commercial or salon use.
If the supply cord of this unit becomes damaged, discontinue use immediately and
return the appliance to your nearest authorised Remington
®
service dealer for repair or
replacement in order to avoid a hazard.
Special tools are required for any examination, adjustment or repair. Unqual
ifi
ed repair
work could lead to hazardous conditions for the user.
We do not accept responsibility for damage to the product, persons or other item(s),
caused by misuse, abuse or non-compliance with these instructions.
Caution:
To prolong the life of your hairdryer it is recommended that you avoid using the
concentrator and diffuser when operating the hairdryer on its maximum heat setting.
WIRING INSTRUCTIONS UK Plugs Only
This product is
fi
tted with a BS1363 plug fused at 13A. If the plug is unsuitable, it should be
disconnected and an appropriate plug
fi
tted as detailed below. If it is necessary to replace
the plug fuse, use only fuses that are approved to BS1362, rated at 13A. If in doubt consult
a quali
fi
ed electrician.
The wires in the mains lead are coloured in accordance with following code:
BLUE - NEUTRAL
BROWN - LIVE
As the colours of the wires in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
- The wire which is coloured BLUE must be connected to the terminal which is marked
‘N’ or coloured BLACK. The wire which is coloured BROWN must be connected to the
terminal which is marked ‘L’ or coloured RED. Never connect either of the wires to the big
EARTH terminal marked ‘E’ or coloured GREEN or GREEN AND YELLOW.
Do not direct the air
fl
ow towards the eyes or other sensitive areas.
Keep this product out of reach of children. The use of this appliance by persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge
can give cause to hazards. Persons responsible for their safety should give explicit
instructions or supervise the use of the appliance.
Always ensure the voltage to be used corresponds to the voltage stated on the unit.
Summary of Contents for Stylist TURBO 2200 D3710
Page 1: ...D3710 3 TURBO 2200...
