![background image](http://html1.mh-extra.com/html/remington/silent-drive-rph75r/silent-drive-rph75r_users-manual-and-operating-instructions_1438389009.webp)
9.
www.remingtonpower.co.nz
RPH75R
KEROSENE / DIESEL HEATER
MAINTENANCE
WARNING:
Never service heater
while it is plugged in or hot.
Do not tamper with the unit. Have an expe-
rienced serviceman make any necessary
adjustment or repairs.
We suggest following a maintenance sched-
ule as follows:
Fuel & Fuel Tank
Flush tank every 200 hours of operation or
as needed. DO NOT flush with water, use
fresh kerosene only.
Spark Plug
Clean and re-gap every 600 hours of opera-
tion or replace as needed. After removing
the spark plug, clean the terminals with a
wire brush.
Re-gap the terminals to 0.140” (3.5mm).
(See Figure 5)
Follow the long term storage
instructions on the following page to
flush the tank.
SPARK PLUG
BURNER BODY
Figure 5.
Nozzles
Nozzles should be cleaned or replaced
at least once per heating season. Con-
taminated fuel could make this necessary
immediately. To clean dirt from nozzle, blow
compressed air through nozzle front. It may
be necessary to soak nozzle in clean kero-
sene or diesel to help loosen any particles.
(See Figure 6)
Figure 6.
Filters
The fuel filter and oil filter should be cleaned
at least twice per heating season by rinsing
it in clean kerosene or diesel.
Contaminated or old fuel could make clean-
ing necessary immediately. (See Figure 7)
Figure 7.